- Perfect balance between price and performance, the AT-One is ideal for those looking for reliable results at low prices
- The frequency plan of AT-One is divided into two groups with 4 channels available in each group
- The ATW-11 system is equipped with a discreet and robust pocket transmitter
- The bodypack transmitter has a 4-pin HRS connector, which is able to connect to all Audio-Technica wireless microphones
- Up to 10 hours’ battery life with 2 x 1.5V AA batteries
- Robust construction from high quality components
- Delivered in a transport case with a rack mount kit and detachable antennas
ATw-11
THE AT-ONE ENTRY LEVEL UHF SYSTEM, THE BEST EQUIPPED ON THE MARKET
AT-One, Audio-Technica’s entry level UHF wireless system. With a 2 x 4 channel frequency plan for enhanced flexibility, sturdy but stylish build quality and a simple user interface, AT-One is ready to become your perfect wireless companion.
AT-One is designed with simplicity and ease-of-use in mind. Equipped with a practical carrying case, rack-mount kit and detachable antennae, AT-One is the perfect balance of price and performance, ideal for those looking for accurate, reliable performance at an entry level price. The AT-One’s frequency plan is divided into two groups with 4 available channels in each group split between the Europe wide license free frequency range and the LTE duplex gap. Users can choose up to 4 channels within one group.
Available in three configurations, AT-One can be purchased with a beltpack or handheld transmitter. The ATW-11 comes equipped with a sturdy, discreetly designed beltpack, providing 10mW RF output power, damping switch and a battery life of 10 hours.
- Designed for quick and easy use
- Perfect balance between price and performance, the AT-One is ideal for those looking for reliable results at low prices
- The frequency plan of AT-One is divided into two groups with 4 channels available in each group, one in the range of authorized European frequencies and the other in the duplex Gap
- Users can choose up to 4 channels in a group
- The ATW-11 system is equipped with a discreet and robust pocket transmitter
- RF transmission power 10mW
- The bodypack transmitter has a 4-pin HRS connector, which is able to connect to all Audio-Technica wireless microphones
- Up to 10 hours’ battery life with 2 x 1.5V AA batteries
- RF Indicator light
- Robust construction from high quality components
- Delivered in a transport case with a rack mount kit and detachable antennas
“2 X 4 Channels”
AT-One’s frequency plan is divided into two groups, each with 4 channels available, one in the range of authorized European frequencies and the other in the duplex gap. Users can choose up to 4 channels in a group.
“rf light indicator”
The display on the half-rack receiver clearly indicates both the RF and AF levels.
“12v power”
The ATW-R1 receiver delivers a voltage of 12V / 100 mA for powering an ATW-B80 booster antenna, active splitters, an antenna combiner or any other active component.
delivered in a case
The AT-One comes with an ATW-R1 receiver, an ATW-T1 pocket transmitter, detachable antennas, a rack-mount kit, and a power supply, all in a hard carrying case.
easy to use
The AT-One has been conceived and designed for quick and easy use. Simply open the carrying case, connect, and your UHF wireless system is immediately operational.
hrs connector
The ATW-T1 bodypack transmitter (included) is equipped with a 4-pin HRS connector, so you can plug in any Audio-Technica wireless microphone, as and when required.
removable antennae
The antennae of the AT-One wireless system are detachable, which alternatively allows remote operation via a single BNC cable.
Overall System | |
---|---|
Operating Frequencies | F-Band: 824 – 831 MHz, 863 – 865 MHz |
Modulation Mode | FM |
Frequency Response | 60 Hz – 16 kHz |
Frequency Stability | +/- 0.005%, Phase lock loop frequency control |
Operating Range | 60m, typical |
Number Of Channels | 2 x 4 frequencies |
Body Pack | |
RF Power Output | 10 mW |
Battery Life | 10 hours – depending on battery type and use pattern |
Battery Type | Two 1.5V AA alkaline (not included) |
Dimensions | 66 mm x 98 mm x 22 mm (W x H x D) |
Input Connections | Pin 1: GND Pin 2: INST Pin 3: Mic Pin 4: DC Bias +10V |
Spurious Emissions | Following national regulations |
Receiver | |
Receiving System | Antenna switching diversity |
Image Rejection | 55dB minimum |
Sensitivity | 10dBµV (S/N 60dB @ 20 kHz deviation) |
Maximum Output Level | Mic / Line (0 / -20dB) |
Antenna Input | BNC type, 50 – BIAS voltage 12V DC 100mA each |
Dimensions | 200 mm x 42 mm x 122 mm (W x H x D) |
Weight | 418 g without accessories |
Accessories Included | AC Adapter, Antennas, Rack mount adapter, protective carrying case |
Audio Output Balanced | 4dBV |
Audio Output Unbalanced | -2dBV |
Dynamic Range | HH: 108 dB, BP 103 dB (@ max deviation) |
Output Connectors (Instrument) | Unbalanced: 6.3 mm mono jack |
Output Connectors (Microphone) | Balanced: XLRM-type |
Total Harmonic Distortion | <1% – 20 kHz deviation @ 1 kHz |
You must be logged in to post a review.
Reviews
There are no reviews yet.