Generic filters
Search in excerpt
£260.00 Inc VAT

Mono piano contact mic system – for acoustic pianos

  • 2 x 8″ C-Ducer tape mics
  • Excellent sound reproduction
  • Solves feedback problems
  • Requires Phantom Power
C-Ducer
Categories: , SKU: MI/CON/AMG01

Mono piano contact mic system for acoustic pianos

This piano contact microphone kit is an excellent alternative to traditional microphones for miking acoustic pianos. The C-Ducer tape microphones pickup only the actual vibrations of the piano sound board and so offer exceptional feedback resistance and prevent pickup of unwanted spillage from other sound sources. Simply attach the mics to the piano as instructed and connect to your sound system as usual (note – these mics require Phantom Power (PP) from your mixer or an external PP unit to operate).

Tapes should be attached in the positions shown in the diagrams (user manual); experimentation is recommended for optimum results, however, it has been found that best results are generally obtained by mounting the tapes directly under the bridges and between the ribs.

CQ 2/8 KIT INCLUDES
2 x microphones
1 x Pre-amp
1 x Spare reel Hi Low Tape
1 x reel Hi Tac
4 x Spare Sticky Pads
1 x Pre Amp Clip
4 x Cable Clips
1 x User Manual

– – – – – – – – – – – –

Technical Specifications

  • Output Impedance | 600 Ohms
  • Output Type | XLR type balanced
  • Frequency Response | 25Hz to 50KHz
  • Output voltage (max) | 1.5V
  • S/N ratio | 85 dB(A)
  • Distortion | Less than 0.05%
  • Power | DIN 45596 48V Phantom
  • Supplied in black plastic boxe | 230mm x 190mm x 45mm

Brand

C-Ducer

C-Ducer

Reviews

There are no reviews yet.

Be the first to review “C-Ducer CQ2 Mono 2”

You may also like…